|
1. Could you please suggest which machine would be suitable for my type of
work?
ANSWER ..... The best way to determine the machine for you would be to
send off samples for evaluation and testing. In some cases, we can with
some degree suggest the best unit. Regardless, you will have to send
samples for machine setup and testing. Typically we require at least
50 feet of your netting, rope, & tape to adequately test. If you decide
to proceed, the machine is now set for your exact work.
1a. Where do I send my samples to:
NC Netting Machinery
858 Summer Ave
Newark, NJ 07104 USA
p 973-481-3500
2. Could you tell me the smallest rope to the largest rope that these
machines can attach?
ANSWER ..... Our Light duty unit 860N will handle most fine netting. The
81200TF handles rope up to 8mm. The 81500NTP will take care of medium to
extra heavy duty. The 81500NTP attaches ropes ranging from 080-.625 inch
(2-15mm)
3. Can I stitch 2 nets together by using an overlock stitch without a
rope?
ANSWER ..... Of course. The machines will sew the same way without your
operators having to change settings back and forth. This makes like easy
on them and at the same time won't slow down production.
4. You say that you have free shipping, would that be air freight or by
sea?
ANSWER ..... Shipping is free in the USA. Overseas sea freight will also
be no charge on Models 81500NTP , 81200TF, & 81200SN.
5. Is this machine capable of just doing ordinary stitching or
upholstery work?
ANSWER ..... These are not capable of sewing upholstery applications.
Sewing machines for tarps, covers, auto, aircraft, marine, etc. can be
found here:
http://www.n-ccarpet.com/upholstery.htm
6. How long is the warranty on these machines?
ANSWER ..... 1 year manufacturer defect on casting, motor, table, main
shafts. 90 Days on parts/service. The advantage with our units versus
other machines is the limited amount of maintenance involved both with
downtime & part replacement. As long as the machines are kept well oiled,
clean, and updated daily with a fresh needle, you'll minimize issues.
7. How can I get the machine serviced in Australia?
ANSWER ..... If you have sewing machine technicians, they are simple units
to maintain. We of course stock all parts and ship the same day.
8. Would I be able to service the machine by myself?
ANSWER ..... A main concern of ours is that you're comfortable with the
machinery. Therefore, we offer free in-house training on any machine you
decide to buy from us. If you wish, we'll also make a
demonstration/training video on the equipment. The video will show you
do's & don'ts, threading, usage, proper oiling, etc. It will be very
informative and accelerate the learning curve for sure. It also comes in
handy if you have employee turnover. This way all future employees will
have access to formal training.
9. Do you suggest threads for the machines?
ANSWER ..... Yes we will recommend thread for each unit. If you wish,
you may send 3 spools of the desired thread you wish to employ. We’ll let
you know if we approve of your thread thread choice. We'll then be able
to setup your machine without variable. This way we know that we know the
machines will work flawlessly.
10. Does there have to be any change to the wiring of the machine to
make it compatible with 220v or 380 volts?
ANSWER ..... Simply make us aware of your required voltage and we'll do
the rest.
11. How difficult is it to get needles, loopers and such?
ANSWER ..... All NC Machines are backed up with spare parts, needles,
threads, and same day supply shipping.
• Do you all service your own machines?
ANSWER ..... Yes 24-hour turn around time.
• Does your machine use direct feed or Bobbins?
ANSWER ..... Direct feed, bobbinless. You’re able to sew thousands of
feet without having to change thread.
• Does it come with a table and motor?
ANSWER ..... Yes priced online complete with table, servo motor, & stand
workstation.
If you have any other questions, just let us know.
We await your thread, netting, & rope samples.
Thanks
Netting Machinery
1-800-526-1184
Our
machinery is designed specifically for heavy duty netting and rope. If you
intend to attach rope to netting or simply serge/finish the edge of
netting, our machinery will provide you with life-long lasting equipment.
Their heavy duty nature allows for minimal downtime and part replacement
is all but eliminated. Example: In 2001, Blue Mountain Industries was
spending upwards of $3000/year on parts. Their per year part replacement
average after employing our 81500NTP is $63. Valued Client West Coast
Netting employs our equipment for the same reasons.
Simply send us your netting & rope samples (at least 25 feet of each)
We'll sew them up for you and if you want the stitch tigher, further
apart, wider....we'll make the adjustments. If you have a finished sample
you'd like us to emulated great.
Here are some frequently asked questions. Hopefully you find it helpful:
sales@nettingmachinery.com |
